 |
Inks: Silver, Carbon, Transparent
Conductive Polymer, UV Dielectric,
and UV Graphic. |
|
|
Substrates: Polyester (Mylar™), Polycarbonate (Lexan™),
Polyimide (Kapton™),
Tyvek™, Polysulphone, HDPE, Polyamide (Kalidex™),
Paper, Glass, Vinyl and others. |
|
|
Minimum Material Size: 1 square inch |
|
|
Minimum Printable Area: < 1 square inch |
|
|
Maximum Material Size: 60” x 120” |
|
|
Maximum Printable Area: 52” x 110” |
|
|
Minimum Substrate Thickness: 0.002” by hand, 0.005” by
machine |
|
|
Maximum Substrate Thickness: 1.000” |
|
|
Layer to Layer Printing Tolerance: Subsequent layers of
ink can be printed to within 0.020” of the first layer
on the largest prints, and to within 0.005” on the
smallest prints. |
|
Printed Area Resistance Tolerance: Overall resistance
within 10% of nominal, linearity within 3% depending on
design. |
|
Printed Line Width and Spacing:
0.025” for substrates up to 12” by 12”
0.050” for substrates up to 52” by 110” |
|
Printed Silver Ink Resistance: typically 0.3 ohms per square at a thickness
of 0.0003” |
|
Printed Carbon Ink Resistance: can be formulated between 1.0 and 20,000 ohms per square at a thickness of 0.0002”. |
